@tbrungard wrote:
Tversity 3.8 pro is showing some bbc shows as codes instead of program names. An example would be B0940BZM which is BBC proms Andreas Schiff. Putting the code into google brings up the title. This did not happen on some previous versions. Is there any fix for this or any record of an older version without this problem. The code appears to be the way the BBC indexes the shows on their web site.
Posts: 1
Participants: 1
@JDN wrote:
Hello,
I have a large music library attached to the TVersity server in “folder view”.
The folder structure is ARTIST \ ALBUM and the ALBUM folder contains the music tracks (in FLAC format).Now I notice that, when I select an artist in my media player, some album folders are shown twice; the first is alphabetically in place, the second is at the end of the list. When I replace this album folder on my media server (where it is definitely not duplicate) to a temp folder and I do a full refresh of the TVersity library, the folder that was shown twice is gone (of course, I moved it), but now another album folder is shown twice. Again the first alphabetically in place, the second at the end of the album list.
I will give an example:
When I select the artist (folder) Steven Wilson, TVersity shows these albums (subfolders):
Grace For Drowning
Hand Cannot Erase
Insurgentes
The Raven That Refused To Sing
To The Bone
InsurgentesNote the duplicate "Insurgentes".
Now, when I move the subfolder Insurgentes to a temp folder and do a full rescan, the albums shown by TVersity are:Grace For Drowning
Hand Cannot Erase
The Raven That Refused To Sing
To The Bone
Hand Cannot EraseNote the duplicate "Hand Cannot Erase"
Thanks,
JDN
Posts: 1
Participants: 1
@igipop wrote:
Using version 3.8, I am able to play songs fine but none of my artwork is showing. Can this be enabled somehow in TVersity? It would make it 10000 times better and its already great...
![:slight_smile:]( ":slight_smile:")
Thanks
Igor
Posts: 1
Participants: 1
@auspexa wrote:
No matter what I tried I can't get 1920x1080 on my TV. It looks like transcoding output is about 300x180 and the quality is terrible. My pc is very powerful and my wifi has enough bandwidth to deal with HD video, what should I do?
Posts: 1
Participants: 1
@tkanderso wrote:
Could not find a general support email so asking here. I've used Aiseesoft to upscale video to 4K but having issues rendering. Did some general searches about Tversity and support of 4k. Not sure if it is Tversity, something with my PC, or a combination. Anyone have luck streaming a 4K video from their PC to a 4K TV?
Posts: 1
Participants: 1
@Bukashgka wrote:
Hello!
I have little question about menu. I share folder with name "films" and when i connect to this access point made by program, i see there next folder-tree:
films (Top level folder)
+FirstFolder1
++FirstFolder2
+SecondFolder2
etc.
How can i delete the top-level folder named "films"? To to see next folder-tree on connect:
FirstFolder1
+FirstFolder2
SecondFolder2
Posts: 1
Participants: 1
@MattJ2000 wrote:
Hi there
I have recently upgraded from v1.97 to 3.8
I have a 6 seperate hard drives, each with a single folder containing many folders.
Previously, I would add the single top folder to TVersity, once for each hard drive.
i.e. H:\Video Library I:\Video Library J:\Video Library
and then all the Video Library folders would merge and appear once in TVersity.However, in the new version, 2 of the Video Library folders merge in a seperate folder, so now when I look at Tversity media, there are 2 entries: Video Library & video library
rather than it all being merged together, 2 of the hard drive merge in the separate lower cased folder.
How can I remedy this?
Thanks
Matt
Posts: 1
Participants: 1
@tbrumby wrote:
States that it has started successfully but then says could not connect to the server. Then gets stuck in a continual loop.
Uninstall and reinstalled multiple times. Scanned for infections.
Issue unresolved.
Posts: 1
Participants: 1
@jtkstc wrote:
I have not been able to have more than 6 folders show up on my PS3 or PS4 after adding them into the media sharing window. Is this a design or a bug?
Posts: 2
Participants: 2
@Whateverman wrote:
Hello - I've searched the forums (and the web in general) prior to posting this, and couldn't find anything.
I run the purchased Media Server Pro (3.8) from my Win10 desktop. It's publicly accessible through my router, and prior to a week ago, used it successfully to publish audio recordings from several bands I'm in. Everything works fine: as long as people know the URL, they can get to, browse and play the MP3s.
Last week, I added several .MOV videos from one band's live performance. These were recorded via iPhone (not mine, nor by me), and all I did was drop them into a folder, index it for video and audio, and publish as usual.
In Chrome, only one of the files plays video and audio; the rest just show up as a blank/black box, with audio playing normally. The web interface shows a generic video icon (rather than a screen capture of the video) for all of the "audio-only" video files.
On the desktop that runs the media server, they play fine in VLC player. From my wireless HDTV, I can browse to the folder in the media server and play the videos correctly. However, they don't display video in Chrome, either locally or remotely.
For hints as to the problem, Win10's native "Movies and TV" app (run on the same machine that the server is on) squawked about a missing H265 (<-- I think) codec. "VLC player" played them fine, but I installed the codec nonetheless. Now "Movies and TV" plays them fine - but the video is still missing in Chrome.
Other videos I've published (including other .MOVs) play fine in Chrome. Obviously, I suspect a codec issue, because one of the dozen band videos (which all came from the same phone) plays fine, but not the other eleven. I'm a bit stumped here. Can anyone suggest things I can investigate? I haven't looked at the debug logs yet, so that's on my TODO list - but still, this is a head-scratcher...
Thanks in advance.
Posts: 2
Participants: 2
@tginsandiego wrote:
PRO v3.8 user, been happy with TVersity for several years. This is a new issue, that only started recently, after a series of Windows 10 updates, so I am assuming that's part of the issue.
All items in my library seem to be locked into the playback location they were at before the updates. Videos that have not been played can only ever by played from the start, not resumed.
Videos that had been played to some point, ALWAYS resume at that point, even if "Restart" is chosen. If they are played, subsequent viewings start at the previous point, not the new offset.
I would guess that however the program stores the value for "played to this point" for each video- either a database or file -- has been locked, or had it's permissions changed by an update, so that the program can't reset it. I have ensured that obvious locations (program install folder, user AppData folders) have permissions correctly set, but that didn't seem to help.
I am going to re-install, to see if that helps, but any other suggestions would be appreciated.
Thanks
T.
Posts: 1
Participants: 1
@makaiguy wrote:
I know this forum is pretty much dead, but I’m going to post in case somebody knowledgeable happens to wander in someday.
I use TVersity to access audio and image files, mostly audio, located on my desktop computer via android mobile devices and Roku units on my home wifi network. Consequently I’m using different apps on different devices to do this.
One of the things I’ve liked best about TVersity is the indices it creates (title, artist, genre, etc.) from the mp3 tags on my audio files. Especially useful are the extended indices (genre/artist for instance).
But I must have changed something because now when I access Tversity from any of my devices I no longer get access to any indices, I only see the list of folders containing the individual files.
I keep playing around in the TVersity GUI, looking for some appropriate setting, but so far I’m coming up empty. I have uninstalled and reinstalled TVersity but it has made no difference.
Can anyone suggest what I need to do to get the indices back?
Additional info: Don’t know if this is relevant, but under Status / Server Messages are scads of error messages - “Error - can’t allocate buffer entry for thread”
Posts: 3
Participants: 2
@wtaylorbasil wrote:
I plays MPEG and others but not MKV.
Any profile settings needed?
Posts: 2
Participants: 2
@Bigwozza wrote:
I have just re-purchased TVersity 3.8 Pro - having bought the same version back in 2014. I had it working on my old Palasonic TV after lots of issues.
New TV - Samsung 7 Series and it just doesn’t see TVersity ( No DNLA ?) but I also tried with my Sony Blu Ray player ( which used to work fine) but that now just says “Waiting for Server to start” - and times out.
My WD Live TV is connected to the TV and work fine - but doesn’t see TVersity at all. I have a Roku box on another TV ( same network). But when I look at the Rich Client TVersity Media Server - Status, it shows no devices at all.
I can however Chromcast successfully, but only from Chrome web browser - the “Chromecast” icon in TVersity is greyed out.
Please can someone give an old man a bit of gentle advice.
Thanks
Warwick
Posts: 3
Participants: 2
@Fingers wrote:
Greets.
Is there a guide to Codec installation that’s less than 10 years old ?
I have searched the documentations and this forum, and all I found were either over 10 years old, or based around an image that no longer exists.
I have files that display fine in windows media player (i only use MPC or VLC, but I just tested them on the WMP itself) , I have the K-Lite Codec pack installed (Mega, lots of stuff) and my Pro license TVersity chokes on them. That’s my 4th Codec reinstall over this, including installing the 6 year old CCCP pack because it had instructions. It still failed at Transcoding.
Now, I realize I will probably have to get custom definition of device for my Lg smart TV that is NOT on the supported list to eventually get subtitles.
I can field test on current iphones, ipads, XBox 360, High Sierra with current safari/firefox/Chrome. It’s the TV I need subtitled, but browsers access is also desirable.
Is there such a set of directions ?
Posts: 1
Participants: 1
@iris18 wrote:
First Tversity on my PC (Win7, yes I know, old PC for streaming) kept giving me the nonstop “could not connect to server. please start sharing” thing. Finally that stopped after uninstalling and reinstalling a couple of times and a couple reboots. Now I re-added all my folders and files and all devices I would stream to are telling me “no playable media” even though the folders and files are identical to what I had set up before I reinstalled. Can’t figure out what I’m missing.
Now it’s refusing to even connect anymore, despite reboots and reinstalls. Other media streaming devices are working fine from PC. TVersity just won’t connect.
Posts: 4
Participants: 2
@pixlogix wrote:
The Magento 2 Form Builder from Pixlogix enables the online store owners to add an intuitive contact or feedback form easily. It empowers store visitors to provide valuable feedback or place an inquiry for the business. Once the form is submitted using Flexible Magento 2 Contact form Extension, the information is shared with the store owner in a couple of minutes. Moreover, Magento extensions for eCommerce help you embed the Magento 2 Multiple Contact Form anywhere in your website on the go. This CAPTCHA enabled Easy Contact Form Extension for Magento 2 also empowers you to protect your store from positional spammers.
Posts: 1
Participants: 1
@koray_sueda wrote:
TVersity Screen Server İnquiries.
1.AMD/NViDİA video encoding , When income support ? or, in the future?
2.uncompressed audio " .flac/.Wav " When income support ? or, in the future?Thank You /TVersity
Google Translate
Posts: 4
Participants: 2
@bromley47 wrote:
I am using the TVersity free version until I see if it works OK. I have a Pix-Star Photo frame and using the PS4 as media playback device as advised by Pix-Star but the pictures only show on the frame as thumbnail size. Pix-Star say there might be a setting in the server to adjust the picture sizes? or is it a case of somehow deleting the thumbnails from the Picture folder?
Sometimes however the correct sized pictures do show on the frame ok. So it looks like it is getting the thumbnails from somewhere?
I am using Windows 11
Posts: 1
Participants: 1
@makaiguy wrote:
The last post I’ve found re Malwarebytes’ scan results was 13 years ago, so I’m starting a new thread:
Malwarebytes free version 4.5.5 just flagged this TVersity 3.8 file as malware:
C:\PROGRAMDATA\TVERSITY\MEDIA SERVER\SQLITE3.EXEWindows shows this file was:
Created: December 12, 2011
Modified: December 12, 2011This file has never been tagged as malware by Malwarebytes or any other scan I’ve run in the past. Windows Defender finds no problem with it.
I’ve concluded this is a false positive. Can anyone confirm?
Posts: 2
Participants: 2
